YASKAWA
TOEP C720600 05B LCD Keypad Attachment Installation Manual
19
2.
Remove the LED keypad.
A - LED Keypad
Figure 5.17 Remove the LED Keypad
3.
Remove the screw that attaches the front cover of the conduit.
Figure 5.18 Remove the Screw that Attaches the Front Cover of the Conduit.
4.
Connect the supplied ground wire to the drive conduit bracket.
Use the screw that attaches the conduit bracket to connect the drive side of the ground
wire to the drive conduit bracket.
Tighten the screws to a correct tightening torque:
• M4
×
10 truss head screws: 0.98 N
∙
m to 1.33 N
∙
m (8.67 in
∙
lb to 11.77 in
∙
lb)
Note:
There are four different ground wires in the option package. The length and the terminal size on the drive side
of the ground wire are different for different drives. Use the correct ground wire for your drive.
