1.3 Safety information
The system is constructed and produced for:
n
communication and process control
n
general control and automation tasks
n
industrial applications
n
operation within the environmental conditions specified in the technical data
n
installation into a cubicle
DANGER!
This device is not certified for applications in
–
in explosive environments (EX-zone)
The manual must be available to all personnel in the
n
project design department
n
installation department
n
commissioning
n
operation
CAUTION!
The following conditions must be met before using or commis-
sioning the components described in this manual:
–
Hardware modifications to the process control system should only be
carried out when the system has been disconnected from power!
–
Installation and hardware modifications only by properly trained per-
sonnel.
–
The national rules and regulations of the respective country must be
satisfied (installation, safety, EMC ...)
National rules and regulations apply to the disposal of the unit!
Applications conforming
with specifications
Documentation
Disposal
HMI
General
Safety information
HB160 | TP-smart | H71-71A41-0 | en | 23-10
6
