3.2 Commissioning
CAUTION!
–
Before commissioning the device must be brought to room tempera-
ture.
–
At condensation the device must be absolutely dry before connected
to power.
–
To avoid overheat during operation the device must not be laid open
to direct sun light.
–
After opening the control cabinet or desk, there are parts with pos-
sible dangerous voltage available.
–
For all signal connections only screened cables are permitted.
–
Signal cables must not be let within the same cable shaft as high
voltage cables.
CAUTION!
When changing the
‘Regional Settings’
, please note that only
English
and
German
are supported, other languages can lead to a system crash.
HMI
Deployment
Commissioning
HB160 | TP-smart | H71-71A41-0 | en | 23-10
19
