YASKAWA GA800 Series, Technical Reference

Page: 780 / 1016

12.7 F: Options
780 YASKAWA SIEPC71061737B GA800 Drive Technical Reference
12.7 F: Options
F parameters are used to set option cards, which function as interfaces for encoders, analog I/O, digital I/O, and
fieldbus communication.
◆
F1: Encoder Option Setup
F1 parameters are used to set the operation of and protective function for the encoder option card. The following
table lists the setting parameters available for each option card.
Refer to the instruction manual packaged with the encoder option card for more information on installing, wiring, and
setting the encoder option cards.
WARNING! Sudden Movement Hazard. Do test runs and examine the drive to make sure that the command references are correct.
If you set the command reference incorrectly, it can cause damage to the drive or serious injury or death.
WARNING! Sudden Movement Hazard. Make sure that the host controller circuitry has correct safety design that will let you keep
control of the motor if the drive loses speed feedback. If you do not have control of the motor, it can cause serious injury or death.
Table 12.43 Encoder Option Card Setting Parameters
Setting Parameter
Encoder Option Card
PG-B3 PG-X3 PG-F3 PG-RT3
F1-01 x x x -
F1-02 x x x x
F1-03 x x x x
F1-04 x x x x
F1-05 x x x x
F1-06 x x x -
F1-08 x x x x
F1-09 x x x x
F1-10 x x x x
F1-11 x x x x
F1-12
*1
x x - -
F1-13
*1
x x - -
F1-14 x x x x
F1-18 x x x x
F1-19 x x x x
F1-20 - x x -
F1-21 x x - -
F1-30 x x - -
F1-31
*2
x x - -
F1-32
*2
x x - -
F1-33
*1 *2
x x - -
F1-34
*1 *2
x x - -
F1-35
*2
x x - -
F1-36 - x - -
F1-37
*2
x x - -
F1-50 - - x -
F1-51 - - x -