Page 6
Ethernet Port
Connect the 3rd party Datalogger to the Pass-Through in the bottom left-hand corner
of the ENC using the 3-Pin Connector provided in the ENC Kit.
Connect the RS485 inverter daisy chain to the inverter communication board using
the 5-Pin Connector provided in the ENC Kit.
NOTE: The 5-Pin Connector is installed on the port on the bottom of the inverter
communication board (behind the ENC) .
The RJ45 LAN cable is inserted into
the Ethernet port of the ENC.
The LAN cable must be able to access
the Internet without port filtering behind
the firewall.
5
A+ B- G
Vin GND A+ B- G
RS485 of 3rd Party Data Logger
RS485 Inverter Daisy Chain
4
Optional wire
Optional wire
A + / B - / G
A + / B - / G
