Page 12
3
4
Quit New Gateway
Activate
Once connected to the network navigate
back to the APP. Note do not close the
app as you will need to repeat the previ-
ous steps.
“DHCP” enabled means that the card will
try to obtain IP and DNS by itself from
your server.
This is the recommended settings. If you
network administrator requires a static IP,
disable this feature and enter it manually.
“Inverter Baud Rate” :
Speed 2400 / 4800 / 9600 / 14400 / 19200
Parity E / N / O
Data 8 / 9
Stop 1 / 2
“Modbus Range” can be selected in the
range of 1 - 246. Modbus ID 160 should
not be used.
Upload Interval (minutes): You can select
the upload interval for the data going to
the cloud.
DHCP
Inverter Baud Rate
Modbus Range
1 ~ 16
9600 N81
Test
Save the Config
Basic Ethernet RS485
ENC Name: unknown
Model: FG4E-US
SN: 1088000000106
Hardware Ver: V1.4.1751
Firmware Ver: V01.6142
Quit New Gateway
Activate
DHCP
Upload Interval
Advanced Settings
1 Minutes
Test
Save the Config
Basic Ethernet RS485
Runtime: 22 Minutes
MQTT Connection: DISCONNECT
MQTT Server Host: None
Routing: LINK_OFF
MAC: 00005E113C08
IP Address: 0.0.0.0
Mask: 0.0.0.0
Gateway: 0.0.0.0
DNS: 0.0.0.0
