YASKAWA DeviceNet SI-N3, Installation Manual

Page: 13 / 66

4 Option Components
YASKAWA TOEP C730600 84A DeviceNet Installation Manual 13
Table 4.1 Terminal Descriptions
Terminal Pin Color Signal Description
1 Black V- Network common
2 Blue CAN_L CAN data Low
3 - Shield Cable shield
4 White CAN_H CAN data High
5 Red V+
Communications
network power DC
+24V
◆
Option LED Display
The option has two bicolor LEDs:
• Module status (MS)
• Network status (NS)
A - 1000-Series, Z1000U
B - GA500, GA700, and GA800
C - Z1000, FP605
*1
Figure 4.2 Option LED Labels
*1 LED label has transparent background and white letters. Please make sure that you use the correct label for
Z1000 or FP605.
Wait 2 seconds minimum for the power-up diagnostic process to complete before you
verify the LED states.
The operational status of the option LEDs after the power-up diagnostic LED sequence is
complete are described in
Table 4.2 .
Refer to Table 4.3 for more information about the LEDs.
Table 4.2 Option LED States
LED Name
Indication
Operating State Description
Color
Dis
play
MS OFF Power supply OFF There is no power to the drive.