background image

100 WATT MINI/SLIM 

POWER INVERTER

Model

95519

ASSEMbLy ANd OPERATION INSTRucTIONS

 

Due to continuing improvements, actual product may differ slightly from the product described herein.

®

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

TO PREVENT SERIOuS INjuRy, REAd ANd uNdERSTANd 

ALL WARNINgS ANd INSTRucTIONS bEfORE uSE.

Copyright

©

 2006 by Harbor Freight Tools

®

.  All rights reserved.  No portion of this 

manual or any artwork contained herein may be reproduced in any shape or form 
without the express written consent of Harbor Freight Tools.

for technical questions or replacement parts, please call 1-800-444-3353. 

REV 1/07

100 WATT MINI/SLIM 

POWER INVERTER

Model

95519

ASSEMbLy ANd OPERATION INSTRucTIONS

Due to continuing improvements, actual product may differ slightly from the product described herein.

®

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

TO PREVENT SERIOuS INjuRy, REAd ANd uNdERSTANd

ALL WARNINgS ANd INSTRucTIONS bEfORE uSE.

Copyright

©

 2006 by Harbor Freight Tools

®

.  All rights reserved.  No portion of this 

manual or any artwork contained herein may be reproduced in any shape or form 
without the express written consent of Harbor Freight Tools.

for technical questions or replacement parts, please call 1-800-444-3353.

Summary of Contents for 95519










Reviews: