240
YASKAWA ELECTRIC
TOEP C710656 07A YASKAWA Power Regenerative Converter - D1000 Instruction Manual
D.3 UL Standards
D.3 UL Standards
◆
UL Standards
The RU mark applies to products in the United States and Canada and it means that UL has performed product testing and
evaluation and determined that their stringent standards for product safety have been met. For a product to receive UL
certification, all components inside that product must also receive UL certification.
◆
UL Standards Compliance
This converter is tested in accordance with UL standard UL508C and complies with UL requirements. To ensure
continued compliance when using this converter in combination with other equipment, meet the following conditions:
■
Installation Area
Do not install the converter to an area greater than pollution severity 2 (UL standard).
■
Ambient Temperature
IP00/ Open Type Enclosure: -10
°
C to +50
°
C
IP20/ Open Type Enclosure: -10
°
C to +40
°
C
■
Main Circuit Terminal Wiring
Yaskawa recommends using closed-loop crimp terminals on all converter models. To maintain UL/cUL approval,
UL-Listed closed-loop crimp terminals are specifically required when wiring the converter main circuit terminals on
models 2A0030 to 2A0130, 4A0030 to 4A0630. Use only the tools recommended by the terminal manufacturer for
crimping. Refer to
Closed-Loop Crimp Terminal Recommendations on page 244
for closed-loop crimp terminal
recommendations. The wire gauges listed in the following tables are Yaskawa recommendations. Refer to local codes for
proper wire gauge selections.
Note:
The mark indicates the terminals for protective ground connection as defined in IEC/EN60417-5019.
Grounding impedance:
200 V: 100
Ω
or less
400 V: 10
Ω
or less
Wire Gauges and Tightening Torques
Table D.3 Wire Gauge and Torque Specifications (Three-Phase 200 V Class)
RU Mark
Model
Terminal
Recomm. Gauge
AWG, kcmil
Wire Range
AWG, kcmil
Screw Size
Tightening Torque
N
x
m (lb
x
in.)
2A0005
R/L1, S/L2, T/L3
12
12 to 6
M4
2.1 to 2.3
(18.6 to 20.4)
–, +
12
12 to 6
M4
2.1 to 2.3
(18.6 to 20.4)
r1/ 11, 1/ 21,
t1/ 31
14
14
M3.5
0.8 to 1.0
(7.1 to 8.9)
10
16 to 10
M6
5.4 to 6.0
(47.8 to 53.1)
