YASKAWA
SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual
627
Note:
•
On drives with software versions PRG: 01021 and later, this function is enabled.
The
“
PRG
”
column on the nameplate on the right side of the drive identifies the software version. You can also use
U1-25
[SoftwareNumber FLASH]
to identify the software version.
•
The upper limit value changes when the
E1-04 [Maximum Output Frequency]
and
d2-01 [Frequency Reference Upper Limit]
values
change.
•
This parameter sets the frequency reference of Multi-Step Speed 12.
■
d1-13: Reference 13
No.
(Hex.)
Name
Description
Default
(Range)
d1-13
(028E)
RUN
Reference 13
Sets the frequency reference in the units from
o1-03 [Frequency Display Unit Selection
.
0.00 Hz
(0.00 - 590.00 Hz)
Note:
•
On drives with software versions PRG: 01021 and later, this function is enabled.
The
“
PRG
”
column on the nameplate on the right side of the drive identifies the software version. You can also use
U1-25
[SoftwareNumber FLASH]
to identify the software version.
•
The upper limit value changes when the
E1-04 [Maximum Output Frequency]
and
d2-01 [Frequency Reference Upper Limit]
values
change.
•
This parameter sets the frequency reference of Multi-Step Speed 13.
■
d1-14: Reference 14
No.
(Hex.)
Name
Description
Default
(Range)
d1-14
(028F)
RUN
Reference 14
Sets the frequency reference in the units from
o1-03 [Frequency Display Unit Selection
.
0.00 Hz
(0.00 - 590.00 Hz)
Note:
•
On drives with software versions PRG: 01021 and later, this function is enabled.
The
“
PRG
”
column on the nameplate on the right side of the drive identifies the software version. You can also use
U1-25
[SoftwareNumber FLASH]
to identify the software version.
•
The upper limit value changes when the
E1-04 [Maximum Output Frequency]
and
d2-01 [Frequency Reference Upper Limit]
values
change.
•
This parameter sets the frequency reference of Multi-Step Speed 14.
■
d1-15: Reference 15
No.
(Hex.)
Name
Description
Default
(Range)
d1-15
(0290)
RUN
Reference 15
Sets the frequency reference in the units from
o1-03 [Frequency Display Unit Selection
.
0.00 Hz
(0.00 - 590.00 Hz)
Note:
•
On drives with software versions PRG: 01021 and later, this function is enabled.
The
“
PRG
”
column on the nameplate on the right side of the drive identifies the software version. You can also use
U1-25
[SoftwareNumber FLASH]
to identify the software version.
•
The upper limit value changes when the
E1-04 [Maximum Output Frequency]
and
d2-01 [Frequency Reference Upper Limit]
values
change.
•
This parameter sets the frequency reference of Multi-Step Speed 15.
■
d1-16: Reference 16
No.
(Hex.)
Name
Description
Default
(Range)
d1-16
(0291)
RUN
Reference 16
Sets the frequency reference in the units from
o1-03 [Frequency Display Unit Selection
.
0.00 Hz
(0.00 - 590.00 Hz)
V/f
CL-V/f
OLV
CLV
AOLV
V/f
CL-V/f
OLV
CLV
AOLV
V/f
CL-V/f
OLV
CLV
AOLV
V/f
CL-V/f
OLV
CLV
AOLV
Summary of Contents for CR700
