10.2 How to Read the Parameter List
YASKAWA
SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual
467
10.2 How to Read the Parameter List
◆
Icons and Terms that Identify Parameters and Control Methods
The table lists terms and icons.
Icon
Description
The parameter is available when operating the drive with V/f Control.
The parameter is available when operating the drive with Closed Loop V/f Control.
The parameter is available when operating the drive with Open Loop Vector Control.
The parameter is available when operating the drive with Closed Loop Vector Control.
The parameter is available when operating the drive with Advanced Open Loop Vector Control.
Hex.
Hexadecimal numbers that represent MEMOBUS addresses to change parameters over network communication.
RUN
You can change the parameter setting during drive operation.
Expert
The parameter is available in Expert Mode only.
*1
Set
A1-01 = 3 [Access Level Selection = Expert Level]
to show and set Expert Mode parameters on the keypad.
Note:
Gray icons identify parameters that are not available in the specified control method.
V/f
CL-V/f
OLV
CLV
AOLV
Summary of Contents for CR700
