YASKAWA
TOEPC71061723A YASKAWA AC Drive CR700 Quick Start Guide
77
Environment
Conditions
Vibration
•
10 Hz to 20 Hz: 1 G (9.8 m/s
2
, 32.15 ft/s
2
)
•
20 Hz to 55 Hz:
2003 to 2180, 4002 to 4150: 0.6 G (5.9 m/s
2
, 19.36 ft/s
2
)
2215 to 2415, 4180 to 4605: 0.2 G (2.0 m/s
2
, 6.56 ft/s
2
)
Installation
Orientation
Install the drive vertically for sufficient cooling airflow.
Table 14.4 Standard
Item
Specification
Harmonized Standard
•
UL61800-5-1
•
EN61800-3
•
IEC/EN61800-5-1
•
Two Safe Disable inputs and one EDM output according to ISO/EN13849-1 Cat.III PLe, IEC/EN61508 SIL3
Protection Design
Open-chassis type (IP20)
Enclosed wall-mounted type (UL Type 1)
Note:
Installing UL Type 1 kit on an open-chassis type (IP20) drive to convert the drive to a wall-mount enclosure (UL Type 1).
15
European Standards
Figure 15.1 CE Mark
The CE Mark indicates that the product meets environmental and safety standards in the European Union.
Products manufactured, sold, or imported within the European Union are required to display the CE Mark.
European Union standards include standards for electrical appliances (Low Voltage Directive), standards for
electrical noise (EMC Directive), and standards for machinery (Machinery Directive).
This product displays the CE Mark in accordance with the Low Voltage Directive, the EMC Directive, and the
Machinery Directive.
Table 15.1 Harmonized Standard
European Directive
Harmonized Standard
CE Low Voltage Directive Compliance
2014/35/EU
IEC/EN 61800-5-1:2007
EMC Directive
2014/30/EU
EN 61800-3:2004/A1:2012
Machinery Directive
2006/42/EC
•
ISO/EN ISO 13849-1:2015 (Cat.3, PL e)
•
IEC 62061/A2:2015 (SIL CL 3)
•
EN 62061/A2:2015 (SIL CL 3)
•
IEC/EN 61800-5-2:2007 (SIL3)
The customer is responsible for displaying the CE Mark on the final device containing this product. Customers
must verify themselves that the final device is compliant with EU standards.
◆
CE Low Voltage Directive Compliance
It has been confirmed that this product complies with the CE Low Voltage Directive by conducting a test
according to IEC/EN 61800-5-1:2007.
The following conditions must be satisfied for machines and devices incorporating this product to comply with
the CE Low Voltage Directive.
■
Area of Use
Install this product in a location with Overvoltage Category III and pollution degree 2 or less as specified in IEC/
CE 60664.
■
Guarding Against Debris
When you install IP20/UL Open type drives (models: 2xxxxB, 4xxxxB), use an enclosure panel that does not let
unwanted material enter the drive from above or below.
EN