Installation 1-12
Configuring a PC with a Static IP Address
1.
Select an existing connection or create a new network connection for communication with the
EtherNet/IP Option Card
.
1.1 Select
Start
==>
Settings
==>
Network
Connections from the task bar in the Windows OS.
1.2 Select
the
network
connection to be used.
2.
Right click on the network connection and select
Properties
from the drop down menu.
3.
Select
Internet Protocol (TCP/IP)
from the components displayed.
Note: If a TCP/IP selection is not available, it may be installed by selecting Install. Administrator access to the PC and the OS
operating system installation CD-ROMs may also be required.
3.1
Select
Properties.
Note: If the PC is on a building or office network, disconnect it from that network before proceeding. Record the existing net-
work settings. If the network connection already has an IP address assigned on the EtherNet/IP Local network, ignore the follow-
ing instructions and just click on Cancel.
3.2
Select the
Use the following IP address
radio button
.
3.3
Enter the IP address of a vacant IP address on the EtherNet/IP Local Network (192.168.1.19 in this example).
3.4
Enter the subnet mask for the EtherNet/IP Local Network (255.255.255.0
in this example
).
3.5
Check the system network schematic or with your network administrator to ensure that the IP address does not already exist on
the network.
3.6 Once
the
IP address
and
Subnet mask
are entered, select OK.
Note:
It may be necessary to reboot the PC in order for the changes to take effect.
Fig 1.5 – PC Network Settings
Summary of Contents for CM092
Page 23: ...Installation 1 18 Notes ...
Page 53: ...EtherNet IP 3 24 Notes ...
Page 57: ...Product Specification 4 4 Notes ...