YASKAWA CIMR-RA Series, Instruction Manual

Page: 75 / 209

4.7 Test Run Checklist
YASKAWA ELECTRIC TOEP C710656 10B YASKAWA Power Regenerative Unit - R1000 Instruction Manual 75
St
a
rt
-Up
Pr
ogr
amming
& Op
er
at
io
n
4
4.7 Test Run Checklist
Review the checklist before performing a test run. Check each item that applies.
No. Checklist Page
1 Thoroughly read the manual before performing a test run. –
2
Check the Wiring Checklist on page 59
.
59
3 Set the correct power supply voltage. 69
4 Turn on the power supply to the regenerative unit and drive. 69
5 Correctly sequence the Run commands. 70
6
The should light after giving a Run command.
–
7
To give Run command from the digital operator, press key to set to LOCAL.
63 , 68
8
To give Run command from the control circuit terminals, press the to set REMOTE. (The LO/
RE indicator is lit off while REMOTE is set.)
68
RE
LO
RE
LO
TOEP_C710656_10B_1_0.book 75 ページ ２０１５年１月８日 木曜日 午後８時５５分