Yaskawa Solectria Solar
DOCR-071070
Page 16 of 30
Figure 3-9: Bottom face of the De-Combiner, showing the area for conduit connections for the Battery Subsystem.
STEP 3: Battery Subsystem Conductor Termination
CAUTION
Do not attempt to make connections to the DC De-Combiner if not qualified for electrical
work.
Compression lugs are NOT provided with the DC De-Combiners. Lugs must conform to the specifications
below:
Table 3-3 Lug Specification
LUG TYPE
PLATING &
MATERIAL
MAX. TONGUE
WIDTH
STUD SIZE
TEMP
RATING
TWO-HOLE
1.75 IN. C-C SPACING
Tin Plated
Cu
2.1 in.
M10 (3/8 in.)
90C
MAXIMUM DISTANCE FROM FURTHEST HOLE CENTER TO END OF LUG IS 65MM.
FIGURE 3-10 DC LUG DETAIL
≤ 65 mm
