www.YarkiyLuch.ru
operation time
mode
800 lm
480 lm
55 lm
1200 lm
5 min
1.5 hrs
3.5 hrs
30 hrs
Fully depress (click) the tail cap switch to turn on the light. De
-
press again to turn off the light.
Modes are switched cyclically by side button: 7% (55 lm), 60%
(480 lm), turbo (1200 lm).
Turbo mode is automatically set to 100% (800 lm) mode after 5
minutes.
To select the strobe mode is needed to press the side button
for 2 seconds.
The flashlight has the memory function, it is turned in the last
used mode.
Clicking on tail cap switch and while holding the side button is
possible to turn on the flashlight in the turbo mode.
The torch body can be transformed. When working with two
batteries 18650 the torch length is 250 mm. When working on
one 18650 battery the body length is reduced to 185 mm.
WARNING!
BALLISTA is a high intensity lighting device and
Fully charge the included Li-Ion batteries cell before initial
use.
BATTERIES CHARGING
1. Put included Li-Ion batteries in the base charger follow polar
-
ity.
2. Connect the adapter to the base and plug the AC adapter
end into a 100 – 240 V outlet.
The LED indicator on the AC adapter will turn RED for charging
in process. It will turn GREEN for fully charged.
OPERATION
SPECIFICATIONS
capable of causing eye damage, avoid shining the light directly
into the eyes.
CREE XP-L HI LED rated at 1200 Lumens maximum output.
Uses two Li-Ion Rechargeable Battery 18650, 2600 mAh, 3.7V.
Waterproof IPX 8, underwater 2 m.
Digitally regulated output
–
maintains constant brightness.
Included spare parts: rubber o-rings and nylon holster for carry
-
ing the flashlight on the belt.
Two year warranty.
BATTERIES INSTALLATION
1. Turn the end cap counter-clock-wise until the cap is loose
and remove.
2. Insert included Li-Ion batteries with indicated end first into
flashlight tube.
3. Replace end cap and tighten by turning the end cap
clock-wise.
XL-1200 PROFESSIONAL
