Yardworks CGT48BCU.9, Instruction Manual

Page: 25 / 26

model no. 060-3097-8 | contact us: 1.866.523.5218
14” (36 cm) Brushless Grass Trimmer
1
Quick Start Guide
1. ASSEMBLING THE UPPER SHAFT AND LOWER SHAFT
- Connect the couplings into each other. (See Fig. A1)
- Align the holes and fasten the couplings by tightening the bolt with hex key. (See Fig.
A2)
2. ASSEMBLING THE AUXILIARY
HANDLE
- Place the auxiliary handle onto the
shaft from the top, and align with
the anti-vibration circle on the shaft.
Secure the auxiliary handle by
tightening the four bolts with the hex
key. (See Fig. B)
3. ASSEMBLING THE SAFETY GUARD
Attach the safety guard to the trimmer head. Align the guard so it slides into the slots
located on the trimmer head. (See Fig. C1)
Secure the safety guard onto the trimmer head with the bolts provided by using hex key.
(See Fig. C2)
Please put the hex key back to the top notch of grass trimmer after use, so it will not get
lost. (See Fig. C3)
A1
B
C2
C1
A2
* This information is provided for your convenience. It does not replace the instruction manual
and safety instructions. The manual and safety instructions need to be read and understood in
their entirety.