Yardworks CCS48BCU, Instruction Manual

Page: 21 / 40

model no. 054-5775-8 | contact us: 1.866.523.5218
21
model no. 054-5775-8 | contact us: 1.866.523.5218
BEFORE OPERATION
1. CHARGING YOUR BATTERY PACK
NOTE:
a) The battery in your new tool is not charged when it leaves the plant; therefore, it must be
full charged before using the first time.
b) If the battery pack is very hot, remove the battery from the charger and allow it to cool to
ambient temperature before attempting to recharge.
c) To prevent damage to the battery pack, please charge the battery to full or no less than
half charge before storage.
d) If the tool will not be used for long periods of time, charge the battery pack every 3-6
months.
CHARGING PROCEDURE (SEE FIG. B)
1) Plug the charger into an appropriate outlet.
2) Slide the battery pack into the charger firmly. Make sure the battery is in the
correct charge position. The light will begin flashing green to indicate the
charging process has started.
3) When charging is completed, the light will become solid green.
4) When fully charged, unplug the charger and remove the battery pack.
WARNING! The charger and battery pack are specially designed
to work together—do not attempt to use any other devices. Never
insert or allow metallic objects into your charger or battery pack
connections because an electrical failure and hazard will occur.
WARNING: When battery charge runs out after continuous use or
exposure to direct sunlight or heat, allow time for the battery to
cool down before re-charging to achieve the full charge.
Operation
B