Yardworks CCS48BCU, Instruction Manual, Page: 19 / 40

model no. 054-5775-8 | contact us: 1.866.523.5218 model no. 054-5775-8 | contact us: 1.866.523.5218
19
7. Tension the chain by tightening the chain tensioning screw (15) in clockwise direction
using the supplied screwdriver. (see Fig. A8.) Do not overtighten.
8. Press the chain cover onto the bar pad; screw the 2 nuts onto the guide pins for chain
bar to lock the chain cover. (see Fig. A9.)
9. If the chain is still loose, tension the chain by tightening the chain tensioning screw (15)
using the supplied screwdriver (19). (see Fig. A10.)
TENSIONING CHAIN AND BAR
NOTE:
New saw chains will stretch. Check the chain tension frequently during first use,
and tighten when the chain becomes loose around the guide bar.
A9 A8
A10
Assembly
WARNING:
• Remove the battery pack before adjusting saw chain tension.
• Cutting edges on chain are sharp. Use protective gloves when
handling chain.
• Maintain proper chain tension always. A loose chain will increase
the risk of kickback. A loose chain may jump out of guide bar
groove. This may injure operator and damage chain. A loose chain
will cause chain, bar, and sprocket to wear rapidly.