ADJUSTING TELESCOPING POLE
(See Figure 7.)
Disconnect the edger from the power supply.
Rotate the collar counterclockwise to loosen.
Push poles towards each other to shorten the pole or pull away from each other to
lengthen the pole.
When the desired length is achieved, rotate the collar clockwise to secure.
NOTE :
Adjust hand placement on the shaft of the edger to keep proper balance. Do not
attempt to use the edger at a length which does not allow you to achieve proper footing and
balance at all times.
OPERATION
Fig. 7
18
Summary of Contents for 060-3808-8
Page 26: ...26 PARTS LIST...