10
Adjusting cutting head angle
(
See Figure 9.
)
Press the button and move the shaft to the lowest position. The shaft will rotate to the 3
positions, when button is pressed. When the shaft is in position, the button will lock into place.
Using the edge guide
(
See Figure 10.)
If necessary the distance bracket can be swung down until it locks. Use the edge guide,
for example, to cut around plants.
Adjusting the line length manually
(
See Figure 11.)
Disconnect the plug from the mains socket!
Press the retaining head (
B
), release it again and pull the ends of the cord out a little. Repeat this process
until the ends of the cord project a little beyond the cord cutter (
A
).
Fully automatic dual line system
The trimmer features a fully automatic dual line system so that the lines are automatically lengthened each
time the trimmer is switched on after a standstill. If the lines should be longer that defined by the cutting
circle then they will be automatically cut to the correct length by the line cutter (
A
).
Summary of Contents for 060-2279-2
Page 16: ...16 Exploded View...
