background image

model no. 054-5752-2  |  contact us: 1.866.523.5218

30

DOUBLE INSULATED

The pole saw is double insulated to provide a double thickness of insulation between you 

and the tool’s electrical system. All exposed metal parts are isolated from the internal metal 

motor components with protective insulation.

GROUNDING INSTRUCTIONS

IN THE EVENT Of A MAlfUNCTION OR BREAKdOWN, grounding provides the path of 

least resistance for electric current, and reduces the risk of electric shocks. This tool is 

equipped with a power cord that has a POlARIZEd plug. The power cord MUST be plugged 

into a matching outlet that is properly installed and grounded in accordance with All local 

codes and ordinances.

dO NOT MOdIfY THE PlUG PROVIdEd. If it will not fit the outlet, have the proper outlet 

installed by a qualified electrician.

 

 WARNING: To avoid injury, use only identical replacement 

parts when servicing the pole saw.

 

 

WARNING: TO AVOID ELECTRIC SHOCKS:

1. Use only identical replacement parts when servicing a 

tool with double insulation. Servicing should be performed 

by a qualified technician.

2. Do not use in wet or damp areas or expose to rain.

!

!

!

!

!

WARNING: To avoid electrical hazards, fire hazards, or 

damage to the tool, use proper circuit protection. This 

chainsaw is wired at the factory for 120 V operation. 

Connect to a 120 V, 15 A circuit, and use a 15 A time-

delayed fuse or circuit breaker. To avoid shocks or fires 

when the power cord is worn, cut, or damaged in any way, 

replace it immediately.

CAUTION: In all cases, make certain the receptacle in 

question is properly grounded. If you are not sure, have a 

certified electrician check the receptacle.

WARNING: Double insulation does not take the place of 

normal safety precautions when operating this tool.

Electrical

Summary of Contents for 054-5752-2


































Reviews: