+
■
■
■
■
■
-----
Neutral Position
Forward
Figure 12a
Reverse Position
Neutral Position
Forward Position
Figure 12b
STUCK LOG PROCEDURE
If a log does not split completely and becomes stuck on the wedge,
never attempt to remove it by modifying the splitter or adding
attachments to the splitter.
Move the control lever to the Reverse positon and allow the
cylinder to retract until the stuck log contacts the stripper plates.
Continue to retract the cylinder until the log is dislodged from the
wedge.
�
65916US25M104_GB.indd 20
Do not
use
the unit if the stripper plates are bent or
damaged. Bent or damaged stripper plates
must
be
repaired or replaced before
use.
"
"
■
■
■
I
--------
Gas Log Splitter » Operator's Manual
CONVERSION BETWEEN HORIZONTAL SPLITTING
POSITION AND VERTICAL SPLITTING POSITION
Horizontal Beam Lock
■
:fffl@·l,iMIMM,
Lifting Handle
Operation I
20
2020/3/27 14:09:03
7
+
