39
TOP VIEW
DOOR HARDWARE
PARTS REQUIRED:
x4
Re-drill hole with 1/2" drill
(Fig. A)
.
Keep drilled hole square to trim to avoid breaking edge of 1-1/2" x 2-1/2" door stiffener.
BEGIN
1
2
Measure and mark location of hole on outside of right door as shown
(Fig. A)
.
Pre-drill hole with 1/4" drill.
1-3/4"
(4,4 cm)
1/4" Pre-drill and
1/2" Drill-through
Fig. A
1/2" (13 mm) Drill Bit
1/4" (6 mm) Drill Bit
3/4" (1,9 cm)
x12
You have fi nished preparing your door for door handle.
FINISH
Install decorative hinges on horizontal trim and fl ush against hinge as shown.
3
1-3/4" (4,4 cm)
35-3/4"
(90 cm)
RIGHT DOOR
Screws
3/4"
(1,9 cm)
x12
