![background image](http://html1.mh-extra.com/html/yardline/lynwood-gable/lynwood-gable_manual_3176409016.webp)
14
PARTS REQUIRED:
FINISH
You have fi nished rafter jig. Proceed to assemble your rafters.
RAFTER ASSEMBLY
120"
(304,8 cm)
3/4"
(1,9 cm)
CLA x2
3" (7,6 cm)
x4
x2
CLA
2 x 4 x 4-7/8" (5,1 x 10,2 x 12,4 cm)
BEGIN
¸
1
Secure one
CLA
fl ush to the fl oor deck using two 3" screws.
Measure over 120-3/4" and install a second
CLA
fl ush to the fl oor deck.
CLA
will overhang the fl oor.
Secure using two 3" screws.
120-3/4"
(306,7 cm)
IMPORTANT MEASUREMENT !!
Fig. A
It is very important to assemble your rafters using the following method for an even and fl at roof.
You will build a rafter jig using the fl oor and two
CLA
parts as shown.
Floor Width
(2) 3" (7,6 cm)
Screws
in each
CLA
There will be an
overhang on
this end.
Flush
Flush