35
Hardware
8 x #8 x 2-1/4” Wood Screw
A:
Make sure middle Rafter Beam Brackets are lined up over centre mark and all are flush and tight to the Beam
Assemblies. (729) Corner LT and (737) Corner RT should be aligned with mitre in Beam Assembly Lift in centre if
needed to adjust Roof Panel Assemblies.
B:
From outside the assembly attach Roof Panel Assemblies together at the Fascia Beam Assembly Ends with
two #8 x 2-1/4” Wood Screws per corner. A helper may need to lift the centre of the roof to bring the corners tight
together. (fig. 15.1 and 15.2)
Fig. 15.1
Fig. 15.2
Fascia Beam
Assembly
Fascia Beam
Assembly
Fascia Beam
Assembly
Fascia Beam
Assembly
Roof
Edge
Left
#8 x2-1/4”
Wood Screw
#8 x2-1/4”
Wood Screw
Step 15: Secure Roof Corners
x 3
Note: You will need to lift Roof
Edge Left at the corner to
install the top screw
