25
Fig. 9.4
Fig. 9.3
Hardware
100 x #8 x 1” Roofing Screw
Roof Parts
4 x Short Panel Left
4 x Short Panel Right
Step 9: Attach Roof Panels
Part 2
E:
Place one Short Panel Left on Roof Rafter Assembly so it overlaps the Long Panel Left and it is flush to the
sides of (729) Corner LT and a slight overhang at the bottom of the Fascia Beam Assembly. There should be no
overhanging at the corners. (fig. 9.3 and 9.4)
F:
Place one Short Panel Right on Roof Rafter Assembly so it overlaps the Long Panel Right and it is flush to
the side of (737) Corner RT and a slight overhang at the bottom of the Fascia Beam Assembly. There should be
no overhanging at the corners. (fig. 9.3 and 9.4)
G:
Attach all panels to Roof Rafter Assembly with 25 #8 x 1” Roofing Screws in locations shown in fig. 9.3. Do
not place any screws along the bottom row. Be sure not to overtighten screws.
H:
Repeat Steps E - G for all four Roof Rafter Assemblies.
(729)
(hidden)
(737)
(hidden)
(736)
(hidden)
#8 x 1” Roofing
Screws (x 25
per assembly)
Short Panel
Left
Panels flush to
corners, no overhang
Panels overlap
at the seams
Fascia Beam
Assembly
Fascia Beam
Assembly
No screws along bottom row
DO NOT overtighten
screws, could cause
damage to roofing
material
Long Panel
Left
Long Panel
Right
Short Panel
Right
