![background image](http://html1.mh-extra.com/html/yardcraft/polaris/polaris_assembly-manual_3178988007.webp)
Step 14.
The side of the platform with the slide and the side with the
climbing set both get four slats.
10ft Avalanche Slide (4C)
Place the slide in place then fasten it with the included lags.
Make sure the lags go into the 2x6 below and not just through the
floorboards.
Rock Wall (4D) & Ladder (4A)
Locate the rock wall and 5ft ladder and place them both in place.
Step 13.
The next step is to fasten the slats to the 2x6’s to complete the
railings.
Use the included template to align the slats then fasten them with
1 3/4” washer head screws.
Before you attach the slats you need to decide where you want
the swing beam, ladder and slide then install the slats accordingly.
Summary of Contents for Polaris
Page 17: ......