![background image](http://html1.mh-extra.com/html/yardcraft/octagon-cedar-gazebo/octagon-cedar-gazebo_assembly-manual_3171935025.webp)
25
Set on top of the L Bracket and center on Post.
Fasten with 1
5/8” Screws through pre-drilled holes.
Fasten with Five (5) 1
5/8” Screws through all
pre-drilled holes.
Locate the Post Trim. Notice the notch on the one
end of the Post Trim.
Place against the outside of the Post.
Install one Hurricane Plate at each Roof Splice, as
shown in previous steps.
Place the Hurricane Plate on top of the 1x6 T&G
Boards. Center the Hurricane Plate between the two
roof panels and fasten the plate to the Rafters and the
Band Board below using one (1) 10 D Nail in each hole.
Place the
Notch
against
the L
Bracket
Post Trim