![background image](http://html1.mh-extra.com/html/yardcraft/octagon-cedar-gazebo/octagon-cedar-gazebo_assembly-manual_3171935022.webp)
22
Fasten using two (2) 3’’ Screws through pre-drilled
holes.
Lift next Roof Band Board into place. Align the
end with the previously installed Roof Band Board.
Fasten with two (2) 3” Screws.
Roof Assembly
Align Here
Fasten Here
Install all remaining Roof Band Boards, as shown
in previous steps.
Tighten Roof Bolts at all Post locations, using a
5/8”
socket and wrench.
Locate the 1x6 T&G Boards, start with the longest
one.
Center 1x6 T&G Board at Rafter Splice, align flush
with the Roof Band Board.
1x6 T&G Board
Align Here
Center at
both ends