background image

9

OPERATION

These symbols may appear on your tractor or in literature supplied with the product.  Learn and understand their meaning.

CHOKE

FAST

SLOW

REVERSE

NEUTRAL

HIGH

LOW

ENGINE

OFF

MOWER

HEIGHT

ENGINE

ON

ENGINE

START

MOWER

LIFT

IGNITION 

SWITCH

CLUTCH/

BRAKE PEDAL

PARKING

BRAKE

 

FREE WHEEL

(Automatic Models only)

DANGER, KEEP

HANDS AND

FEET AWAY

ATTACHMENT

CLUTCH

ENGAGED

ATTACHMENT

CLUTCH

DISENGAGED

Failure to follow instructions

could result in serious injury or

death. The safety alert symbol

is used to identify safety inform-

ation about hazards which can

result in death, serious injury

and/or property damage.

DANGER 

indicates a hazard which, if not avoided,

will result in death or serious injury.

WARNING 

indicates a hazard which, if not avoided,

could result in death or serious injury.

CAUTION 

indicates a hazard which, if not avoided,

might result in minor or moderate injury.

CAUTION 

when used 

without 

the alert symbol,

indicates a situation that 

could result in damage

to the tractor and/or engine.

FIRE 

indicates a hazard which, if not avoided,

could result in death, serious injury and/or
property damage.

HOT SURFACES 

indicates a hazard which,

if not avoided, 

could result in death, serious 

injury and/or property damage.

KEEP AREA CLEAR 

SLOPE HAZARDS

15 

15 

(SEE SAFETY RULES SECTION)

DIFFERENTIAL

LOCK

REVERSE

FORWARD

FUEL

BATTERY

REVERSE

OPERATION

SYSTEM (ROS)

LIGHTS ON

CRUISE CONTROL

EAR

PROTECTION

RECOMMENDED

Summary of Contents for YP18KH38

































Reviews: