14
13
9.
To test if the line is advancing properly, push the but-
ton with your thumb while pulling the line with your fin-
gers. The line should advance freely. (Fig. 30).
10. In the event of the line breaking inside the spool,
repeat the replacement operation.
11. Start the grass trimmer following the instructions in
the “STARTING” section.
MAINTENANCE
1.
Regular cleaning and maintenance of your string trim-
mer will ensure efficiency and prolong the life of your
machine.
2.
After each cutting operation, take apart and clean out
the grass and soil from: the spool and its slot and in
particular the debris shield.
3.
During operation, keep the air slots clean and free of
grass.
4.
Only use a cloth soaked with hot water and a soft
brush to clean the string trimmer.
5.
Do not spray or wet the appliance with water.
6.
Do not use detergents or solvents as these could ruin
the trimmer. The parts made of plastic can easily be
damaged by chemical agents.
7.
If the line cutting blade no longer cuts or breaks, have
this replaced by contacting an authorized service
center.
MAINTENANCE INSTRUCTIONS
Fig. 30
Before carrying out
any maintenance
operations, cut off the electric power supply by
disconnecting the plug from the extension
cord.
CAUTION:
Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120V~, 60Hz, 4 Amp
No Load Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7,500/min.
Cutting Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13” (330mm)
Line Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ø0.065” (1.65mm)
Net Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.4 Lbs (2.9 Kg)
SPECIFICATION
PARTS LIST
No.
Parts No.
Description
1
6011-202A02
POWER CORD
29
6SVABB04-10
SCREW
2
6199-202A01
CORD GUARD
30
6SDABA03-16
SCREW
3
6043-815501
PLATE (PRESSING CORD)
31
6041-840001
TERMINAL BLOCK
4
6SDABB04-14
SCREW
32
6038-202A06
HOUSING (L)
5
6022-202A01
SWITCH
33
6228-202A15
MOTOR ASS'Y
6
6134-202A04
TRIGGER
33-1
6099-202A03
MOTOR
7
6024-202A01
SPRING
33-2
6187-202A01
FIXED PLATE
8
6134-202A05
TRIGGER
33-3
6SDAB-03-12
SCREW
9
6010-202A01
WIRE
33-4
6SDAB-04-12
SCREW
10
6068-202A06
UPPER HANDGRIP (R)
33-5
6270-202003
CUTTER ASS'Y
11
6068-202A05
UPPER HANDGRIP (L)
34
6131-202A04
CUSHION RING
12
6056-202A03
BUTTON
35
6114-202A02
EGDER GUIDE
13
6021-202A01
LEVER
36
6NBB-06
NUT
14
6024-202A02
SPRING
37
6043-202A01
GASKET
15
6131-202A01
JOINT PIPE
38
6SXDB-06-20
SCREW
16
6129-202A01
CENTRAL TUBE
39
6115-202A01
SHAFT PIN
17
6SDABB04-06
SCREW
40
6137-202A01
WHEEL
18
6NAB-06
NUT
41
6NAB-05
NUT
19
6056-230302
BUTTON
42
6SDABB04-08
SCREW
20
6068-230301
CENTRAL HANDGRIP
43
6250-202503
WIRE CUTTING BLADE
21
6SXDB-06-65
SCREW
44
6262-202A02
SHIELD
22
6SDABB04-18
SCREW
45
6024-202A04
SPRING
23
6038-202A05
HOUSING (R)
46
6228-202004A
SPOOL CARRIER ASS'Y
24
6059-202A01
JACKET
46-1
6059-202004
BLISTER PACK
25
6056-202A04
BUTTON
46-2
6008-202001A
SPOOL CARRIER
26
6239-202A01
FIXED RING
46-3
6194-202001
WIRE-CUTTING
27
6024-202A03
SPRING
46-4
6059-202005A
SPOOL COVER
28
6131-202A02
EXPANDING RING
46-5
6140-B23101
PILOT
No.
Parts No.
Description
