![background image](http://html1.mh-extra.com/html/yard-force/yf3003/yf3003_instruction-manual_905771015.webp)
15
ASSEMBLY
To fold the handle, pull the Locking/releasing pin outward on the right side of the machine, and turn the
handle downward to fold the handle.
Add Engine Oil
IMPORTANT:
Any attempt to crank or start the engine before it has been properly serviced with the
recommended oil may result in an engine failure. Place pressure washer on a level surface. Refer to engine
owners manual to add recommended oil to engine.
NOTE: Check Oil Often During Engine Break–in.
Add Fuel
WARNING! NEVER fill fuel tank indoors.
NEVER fill fuel tank when engine is running or hot. Allow unit to cool for two minutes before refueling.
DO NOT light a cigarette or smoke when filling the fuel tank.
WARNING! DO NOT overfill the fuel tank. Always allow room for fuel expansion.
Place pressure washer on a level surface.
Refer to engine owner’s manual to add recommended fuel to engine.
Connect high pressure hose to Pump.(Fig 2)
Connect high pressure hose to spray gun. (Fig 3)
Fit the lance to spray gun. (Fig 4)
Attach desired color coded spray tip to quick - connect wand by pushing to ensure it is clicked in securely.
Insert quick – connect wand into the spray gun, hand tighten until two
parts are locked.
Connect water supply to pump.(Fig 5)
Attach the inlet adapter to the machine’s water inlet. Manually tighten only.
Attach a hose with a quick connect coupling (not included) to the high pressure washer. and turn water
valve on to the fall on position.The water temperature must not exceed
40
°
C(104
°
F).
WARNING!
The pressure washer must only be used with clean water. Use of unfiltered water or corrosive chemicals will
damage the pressure washer.
This pressure washer is not intended to pump hot water. Never connect it to a hot water supply as it will
significantly reduce the life of the pump.
WARNING!
Wear suitable clothing, ears and eyes protecting when working with the equipment. Ensure
that the equipment is functional before each use. Ensure that the mains voltage value
matches the label on the equipment. Check the safe condition of the machine:
OPERATION
Summary of Contents for YF3003
Page 3: ...3 Fig 1 Fig 2 Fig 4 Fig 3 Fig 5 Fig 5 ...
Page 4: ...4 Fig 6 Fig 8 Fig 7 Fig 9 Fig 10 ...
Page 5: ...5 Fig 11 ...