11
Hotline: 1-866-902-9690
1. Remove the oil filler dipstick and wipe oil from it with a clean cloth. Insert the dipstick into the oil filler
neck, and tighten it. (see Fig. 6).
2. Remove the dipstick and check the oil level: the oil level must be between the Min and Max marks on the
dipstick. If near the lower level, fill to upper lever with the recommended oil (SAE30 or equivalent). Do not
overfill. Wipe away any spilled oil align the ribs of the cap with the groove of the filler neck, then rotate
to secure it (see Fig. 7).
3. Before using for the first time, add maximum of 15 ounces of oil (supplied, SAE 30)
FILLING WITH ENGINE FUEL
As shown in Fig. 8
CAUTION!
Always use clean, fresh unleaded gas. Purchase fuel in quantities that can be used
、
within 30 days. Never mix oil with gas.
CAUTION!
Do not fill into the base of neck to allow for fuel expansion. Do not overfill the fuel tank.
CAUTION!
WARNING! Gas is highly flammable and extreme caution must be taken when handling
or working with it. Keep out of reach of children.
CAUTION!
To prevent engine damage the engine is shipped without oil or gas. The engine must be
filled with the correct grade of oil and gas before starting the engine.
WARNING!
Refuel in a well-ventilated area with the engine stopped. Do not smoke or allow flame
or sparks in the area where the engine is refueled or where gas is stored. Avoid repeated or
prolonged contact with skin or inhalation of vapour.
WARNING!
Gasoline with up to 10% ethanol (gasohol) is acceptable.
Do not use unapproved gasoline, such as E15 and E85.
ASSEMBLY
engine oil filler neck
Fig.6
Fig.7
