120v
LITHIUM-ION
TM
12
13
circuitry of the battery pack. Longest life and
best performance can be obtained if the
battery pack is charged in the normal room
condition.
10. Disconnect charger from the power supply
when not in use. This will reduce the risk of
electric shock or damage to the charger if
metal items should fall into the opening.
11. The charger is for indoor use only.
SPECIAL OPERATION SAFETY FOR THE
BATTERY PACK
1. The Li-ion battery pack is not fully charged
at the factory. Before attempting to use it, the
battery must be fully charged first
2. The battery pack should be recharged when
it fails to produce sufficient power on job
which were easily done previously. DO NOT
CONTINUE using product with its battery in a
depleted condition.
3. Do not charge the battery in an air
temperature below 41° F or above 113° F.
This is important and will prevent serious
damage to the battery. Longest life and best
performance can be obtained if the battery is
charged when air temperature is about 68
˚
F.
4. When the machine continues to be used and
the battery temperature is above 113° F, the
battery can not be charged, even you put on
the charger. Let the machine cool for some
times and wait the temperature reduced, it
can be charged again .
5. Protect the battery pack against heat, e.g.
including against continuous sun exposure
and fire. There is a danger of explosion.
6. Do not carry individual battery packs in your
pockets or bags, as they could short-circuit
against other metal items.
7. If an exposed li-ion battery pack does start a
fire, it wll burn even more violently if it comes
into contact with water or even the moisture
in the air. DO NOT throw water on a burning
li-ion battery! A fire extinguisher must be
used.
8. If the battery pack becomes too hot to the
touch during charging, disconnect and
switch off immediatel . Contact Yard Force
immediately at 866-902-9690.
9. Do not open the battery yourself. There is
danger of a short circuit.
10. When battery pack is not in use, keep it
away from other metal objects, lie paperclips,
coins, keys, nails, screws or other small
metal objects, that can make a connection
from one terminal to another. Shorting the
battery terminals together may cause burns
or a fire
MAINTENANCE AND STORAGE
1. Keep all nuts, bolts and screws tight to be
sure the product is in safe working condition.
2. Check the grass collector frequently for wear
or deterioration.
3. Be careful during adjustment of the product
to prevent entrapment of the fingers between
moving blades and fixed parts of the product
4. Always allow the product to cool down before
storing.
5. When servicing the blades, be aware that
even though the power source is switched
off, the blades can still be moved
6. Replace worn or damaged parts for safety.
Use only genuine replacement parts and
accessories.
7. DO NOT attempt to open the charger
and battery pack. There are no customer
serviceable parts inside. Return to any
authorized service center.
8. Store the appliance with battery pack
fully charged at the room temperature
(around 68° F).
9. Every deep discharge cycle decrease the
capacity of battery pack. To prolong battery
life, recommend to charge the battery every
6 months, which over extended periods of
time without use.
Service
a) Have your tool repaired by an authorized
service agent. This tool is manufactured
in accordance with the relevant safety
regulations. To avoid danger, equipment must
only be repaired by qualified technicians
b) Only use parts and accessories made for this
machine by the manufacturer. Failure to do
so can result in personal injury.
RESIDUAL RISKS
Even if you are operating this product in
accordance with all the safety requirements,
potential risks of injury and damage remain. The
following dangers can arise in connection with the
structure and design of this product:
- Health defects resulting from vibration
emission if the product is being used over
long periods of time or not adequately
managed and properly maintained.
- Injuries and damage to property due to
broken application tools or the sudden impact
of hidden objects during use.
- Danger of injury and property damage
caused by flying objects
Warning!
This product produces an
electromagnetic field during operation! This field
may under some circumstances interfere with
active or passive medical ivmplants. To reduce
the risk of serious or fatal injury, we recommend
persons with medical implants to consult their
doctor and the medical implant manufacturer
before operating this product!
ASSEMBLY
Unfold the handle
1. Rotate the handle quick release levers to
release the operation handle. (See Fig. 5).
2. Rotate the handle and then position the lower
handle lock pin into the mower bracket - one
of the three angle positions. (See Fig. 6)
3. Lock the handle in place by closing the quick
release levers- make sure that the handle is
securely locked in position. (See Fig. 7)
Fitting cable clips
Locate the cable into the cable clip and then clip
securely to the handle. (See Fig. 8)
Assemble grass bag and fit it onto the mower
1. Locate the grass bag to attach to the mower.
(See Fig. 9)
2. Insert the grass bag onto the hooks. Release
the rear flap to secure the grass bag in
position. (See Fig. 10)
Installing the mulching plug
NOTE:
Switch off the tool and make sure that the
blade has stopped completely. Then remove the
battery completely.
1. Lift the rear flap with one hand and push the
mulching plug into the rear discharge chute
until it is locked in place. Make sure that the
mulching plug is locked in position.
(
See Fig.
11
)
.
2. Release the rear flap, it will close back to
cover the mulching plug.
3. If you want to remove the mulching plug, hold
the handle of the mulching plug, press down
the hook with your finge , meanwhile lift it
upward slightly and pull it out.
Installing the side discharge chute
NOTE:
Switch off the tool and make sure that the
blade has stopped completely. Then remove the
battery completely.
1. The mulching plug should be installed as
described above.
2. Lift the side discharge cover with one hand
and hook in the side discharge chute with the
other hand. (See Fig. 12)
3. Release the side discharge cover to secure
the chute in position. (See Fig. 13)
Set required function
WARNING!
Before changing any
accessory, switch off the tool and make sure that
the blade has stopped completely. Then remove
the battery completely.
NOTE:
This lawn mower has three functions.
These functions can be converted by changing
accessory setting as described above. Please
see the following chart for detail.
Mulching
plug
Grass
bag
Side
discharge
chute
Collection *
×
√
×
Mulching *
√
×
×
Side Discharge
*
√
×
√
“√”: installed “×”: uninstalled
* The following information:
Collection: the grass has been cut and collected
by grass bag.
Mulching: mulch the grass, by cutting into small
pieces which then degrade and fertilise the lawn
Side discharge: the grass has been cut and
distributed to the side of the machine.
