10
11
SAFETY INFORMATION
Never modify the plug in any way. Unmodified
plug sand matching outlets will reduce risk of
electric shock.
2. Use your charger only to charge batteries
of the type supplied with your tool. Other
batteries could burst, causing personal injury
and damage.
3. Only 2 battery packs are allowed to be charged
continuously in order to prevent over heating of
charger, necessary rest time is required to let
the charger cool down before further charging.
4. When charging is finished, takeaway the
battery pack from the charger, do not leave the
battery pack in the charger.
5. Never carry the charger by its cord or pull it
to disconnect from the socket. Keep the cord
away from heat, oil and sharp edges.
6. Never attempt to charge non-rechargeable
batteries.
7. The cord of the charger is not changeable, do
not continue to use if the cord is damaged.
8. Do not expose to water or rain, do not use in
wet condition.
9. Do not open the charger.
10. Do not probe the charger.
11. Intended for indoor use only.
ADDITIONAL SAFETY INSTRUCTIONS FOR
HEDGE TRIMMERS
1. THIS TOOL CAN CAUSE SERIOUS INJURIES.
Read instructions carefully for the correct
handling, preparation, maintenance, starting
and stopping of the tool. Be familiar with all
SAFETY INFORMATION
controls and proper use of the tool.
2. Only use the tool in daylight or good artificial
light.
3. Never allow children to use the tool.
4. Beware of overhead power lines.
5. Avoid operating while people, especially
children are nearby.
6. Dress properly! Do not wear loose clothing or
jewellery which can be caught in moving parts.
Use of sturdy gloves, non-skid footwear, and
safety glasses is recommended.
7. If the tool stalls, immediately switch it off.
Remove the battery before attempting to
remove any obstructions.
8. Remove the battery before checking,
maintenance or working on the tool.
9. While operating the tool always be sure of a
safe and secure operating position especially
when using steps or a ladder.
10. Do not attempt to repair the tool.
11. Do not operate the tool with a damaged or
excessively worn cutting device.
12. Always wear ear protection, goggles and a
helmet during operating.
13. Always ensure that all guards are fitted when
using the tool. Never attempt to use an
incomplete tool or a tool with unauthorized
modifications.
14. Always use two hands to operate the tool.
15. When transporting or storing the tool, always fit
the blade sheath.
16. Always be aware of your surroundings and stay
alert for possible hazards that you may not
