![background image](http://html1.mh-extra.com/html/yard-force/m0e-16et-410/m0e-16et-410_original-instructions-manual_905870004.webp)
4
5
TECHNICAL SPECIFICATIONS
Model Number
M0E-16ET-410
Voltage
20 V
Battery type
Lithium-Ion
No load speed
1400 min
-1
Cutting length/Capacity
410 mm / 14 mm
Tooth gap
16 mm
Measured sound pressure level(L
pA
)
75dB(A) K=3.0 dB(A)
Measured sound power level(L
wA
)
87.9dB(A) K=3.0 dB(A)
Guaranteed sound power level(L
wA
)
90 dB(A)
Weight
3.4 kg
Vibrations
2.0 m/s² K=1.5 m/s²
Battery pack
Battery pack
B0P-SP07-18-C(5INR 19/65)
Battery type
Lithium-Ion
Battery capacity
40Wh
Battery voltage
20 V
Charger
Charger Type
B0Q-SP03-20
Rated Voltage
220-240V~/50~60Hz
Nominal Consumption
75W
Output Voltage of Charge
20V d.c.
Output Current of Charge
2A
Charging time
Approx.60min
Protection Class
Class II
Protection Category
IPX0
The sound values have been determined according to noise test code given in EN 60745-
2-15, using the basic standards EN ISO 11094 and EN ISO 3744.
The noise figures quoted are emission levels and are not necessarily safe working levels.
Factors that influence the actual level of exposure of work-force include the characteristics
of the work room, the other sources of noise, etc. i.e. the number of machines and other
adjacent processes, and the length of time for which an operator is exposed to the noise.
Also the permissible exposure level can vary from country. This information, however, will
enable the user of the machine to make a better evaluation of the hazard and risk.
Wear hearing protection! The sound intensity level for the operator may exceed 80 dB (A)
and ear protection measures are necessary!
The declared vibration value has been measured in accordance with a standard test
method (according to EN 12096) and may be used for comparing one product with
another. The declared vibration value may also be used in a preliminary assessment of
exposure.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
INTENDED USE
This Li-ion pole hedge trimmer M0E-16ET-460 is intended for trimming hedges, bushes
and shrubs. Observe the technical data for the maximum cutting capacity. Do not cut non
plant material or branches exceeding the stated maximum capacity. For safety reasons it
is essential to read the entire instruction manual before first operation and to observe all
the instructions there in. This product is intended for private domestic use only, not for any
commercial trade use. It must not be used for any purposes other than those described.
TECHNICAL SPECIFICATIONS
WARNING!
Depending on the actual use of the product the vibration values can differ from the
declared total! Adopt proper measures to protect yourself against vibration exposures!
Take the whole work process including times the product is running under no load or
switched off into consideration!
Proper measures include among others regular maintenance and care of the product and
cutting attachments, keeping hands warm, periodical breaks and proper planning of work
processes!