12
13
GB
GB
Emergency Stop
Press
STOP
button to break the mower at any time.
Halt the PIN Code
1. Switch OFF the mains power switch.
2. Press and hold the lock button
.
3. Hold down the lock button
while switching ON the main power switch.
After about 6 seconds, all LEDs on the control panel will start flashing quickly.
4. Release the lock button
.
5. Within 6 seconds, enter your new PIN-Code.
The Robotic Mower will confirm the changed PIN with a single beep.
6. All LEDs will turn off and the Robotic Mower will reboot. The LED of lock button will flash,
confirming that the reboot is complete. The Robotic Mower can now be unlocked with the
new PIN.
NOTE!
If you do not remember your PIN code, please set a new PIN as described above. It is not possible
to reset the device to the default PIN code of "4x
".
Cutting height adjustment
Cutting height can be adjusted by rotarting the height adjustment dial.
Cutting heights range from 20 - 60mm.
NOTE!
To get the best cutting performance from the Robotic Mower and to avoid any damage, it is
advised that you use a lawnmower or grass trimmer to cut the lawn to 60mm or below before
using the Robotic Mower.
Rain Sensor
Technical Data
Model
LUV600Ri
LUV1000Ri
Max cutting area
600 m
2
1000 m
2
Battery pack
28V/2000mAh
28V/2850mAh
Switching power supply
Input: 100-240V AC,
50/60Hz, 56W
Output:32VDC, CC1.5A
Input: 100-240V AC,
50/60Hz, 56W
Output:32VDC, CC1.5A
Mowing time on one charge
60 min
80 min
Rated voltage
28 V
28 V
Rated power
50 W
50 W
No load speed
3500/min
3500/min
Cutting width
18 cm
18 cm
Cutting height
Approx
20-60 mm
Approx
20-60 mm
Charging time
60 min
90 min
Weight
8.5 Kg
8.5 Kg
Measured sound pressure L
pa
53 dB, K=3 dB
Measured power pressure L
wa
64dB, K=3 dB
Degree of protection:
Robotic Mower
IP24
IP24
Switching power supply
IP67, Plug IP44
IP67, Plug IP44
Spare parts
Spare Blades
6 Pcs
9 Pcs
Boundary pegs
150 Pcs
220 Pcs
Boundary wire
120 m
200 m
Connectors
3 Pcs
3 Pcs
