18
19
INSTALLATION
WARNING:
Wear protective gloves before doing any operation.
NOTE
:
Make sure the battery pack is removed before any adjustments are
made
Install the working head
-
Select required working head (shrub trimming blades or grass trimming blades)
1. Slide the working head into the machine and click into place.
2. Make sure the working head is fully secure.
3. Remove the blade cover.
Removal of the working head
1. Fit the blade cover
2. Press both of the working head release buttons and rotate/slide the working head from
the housing.
1
2
OPERATION
Charging the battery pack
WARNING!
Do not use other charging wires which are not recommended by the
manufacturer.
NOTE:
The battery is supplied partially charged. To ensure full capacity of the battery, fully
charge the battery before using it on the product.
1. Connect the battery with the charging wire (Type C adaptor).
2. Select an USB type A power source that match to 5V 1A or less.
3. The green indicator will flash during normal charging.
4. The Indicator will show green when battery pack has been fully charged.
Insert the battery
- Insert the battery into the device; make sure the battery pack is in the right orientation.
IMPORTANT:
Make sure that the battery pack is inserted in the right orientation, torch light
button on up side.
- If you want to uninstall the battery pack, press the battery pack release lever and then
remove the battery pack .
5V 1A