34
WARNING!
Before performing any repair work, always remove the battery pack and
wait until the cutting blade has come to a standstill !
1. Do not spray the unit with water. Ingress of water may destroy the battery pack and the
electric motor.
2. Clean the unit with a cloth, hand brush, etc.
3. Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condi-
tion;
4. Replace worn or damaged parts for safety.
Battery Maintenance:
Use the following procedures to enable optimum usage of the battery:
1. Protect the battery against moisture and water.
2. Store the battery only within a temperature range from 0ºC to 45ºC .As an example, do
not leave the battery in a vehicle or in the trimmer in direct sunlight.
3. Clean the ventilation slots of the battery occasionally with a soft, clean and dry brush. A
considerably shortened operating time after charging is an indication that the battery is
exhausted and must be replaced.
4. If you do not use the product for a long time, please charge and discharge the battery
park once every 6 months.
Cutting System Maintenance:
1. Check that the lubrication system is adequate.
2. Turn the bar over everyday.
3. Check the bar wear.
4.
Ensure that the oil flow hole is unobstructed.
5. Check the chain tension, sharpen the blades and check their conditions eventually re-
moving irregularities.
6. Check the guide bar sprocket conditions.
7. Ensure that the oil reservoir is clean.
Storage:
Clean the exterior of the machine thoroughly using a soft brush and cloth, Do not use water,
solvents or polishes.
Store the machine in a dry place. Do not place other objects on top of the machine.
Transport
Use the original packaging to ship whenever possible.
STORING AND MAINTENANCE
Summary of Contents for LS G30A
Page 2: ......
