manualshive.com logo in svg

Yard force LS G30A, Original Instructions Manual

Share
Download
Yard force LS G30A Original Instructions Manual Download Page 23

20

CAUTION ! 

Always ensure the battery pack has been removed. When the saw chain 

can be raised by around 2mm In the middle of the cutter bar. You know that the chain 
tension is ideal.

If not .

Following the marking on the clutch cover ,Turn the SDS tension knob to Get 

an ideal saw chain tension. 

 CAUTION:  

Proper saw chain tension is extremely important. If saw chain is too tight, 

the guide bar and saw chain will be quickly damaged. If the saw chain is too loose, it 
may get out of the guide bar groove and cause an injury.

 

NOTE: 

All the chain links must lie properly in the guide groove of the saw rail

 

NOTE : 

During cutting . the temperature of the chain rises and its length changes . 

It is important therefore to check the chain tension at least every 10 minutes and to 
adjust it again as required.

 

NOTE:  

A new chain will stretch so adjust the tension after a few cuts. Watch saw 

chain tension carefully for the first half hour of cutting.

Checking the tension of the saw chain

As shown in

 Fig10

Fig 10

2mm

ADJUSTMENT

Summary of Contents for LS G30A








































Reviews:

No comments

Brands by name

Popular brands

Load more brands