background image

28

29

OPERATION

NOTE:

 Before taking off the grass collection bag, switch off the engine and wait until the 

blade has come to a complete stop. 
To take off the grass collection bag, use one hand to lift up rear safety flap and the other to 
grab onto the carry handle. The rear safety flap automatically falls down after removing the 
grass collection bag and closes off the rear chute opening. 
Empty out the grass collection bag then refit to machine.

NOTE:

 If any grass residue is caught in the discharge chute, clean it using a brush. Do not 

remove grass debris in the mower casing or on the blade by hand or with your feet. Instead 
use suitable tools such as a brush or broom. To ensure that the cut grass can be collected 
into the grass collection bag, the discharge opening and inside the mower casing must be 
cleared of any blockages.

MAINTENANCE AND STORAGE

 

 WARNING: 

Before performing any maintenance or cleaning work, always ensure 

that the battery pack/safety key has been removed. Wait until the blade has stopped 
completely and the machine has cooled down.

Cleaning
Cleaning the product

–  Use a soft brush to remove accumulated dust and debris. Wear safety glasses to protect 

your eyes whilst cleaning.

–  Wipe down the product enclosure with a slightly damp cloth. Do not spray the unit with 

water. Water may destroy the switch unit and the electric motor.

Maintenance

NOTE:

 Always wear gardening gloves when handling or working near sharp blades.

1.  Keep all nuts, bolts and screws tight to ensure that the machine is in a safe working 

condition.

2.  Check the grass bag frequently for wear or deterioration.
3.  Examine the machine and replace worn or damaged parts for safety.

Removing/Installing the blade (Fig. X)

1.  Use the correct size wrench to uninstall the blade bolt nut.
2.  Wearing heavy gloves hold the blade still and turn the wrench anti-clockwise to remove 

the bolt.

3.  Fit the replacement blade correctly with marking facing up and align pegs, refit the bolt 

and retighten securely to torque 20N.m.

 

 WARNING: 

Replace or re-sharpen the mowing blade at the end of the mowing 

season. Always have the mowing blade re-sharpened or replaced by a 
recommended Yard Force service centre.
Unbalanced blades will cause the lawnmower to vibrate violently which can increase 
the risk of accidents occurring.

Battery maintenance:

Use the following procedures to achieve the best battery life:
1.  Protect the battery against moisture and water.
2.  Store the battery only within temperature range of 5

 

o

C to 45

 

o

C. Do not leave the battery 

in direct sunlight for extended periods of time.

3.  Clean the battery regularly with a soft, clean and dry brush.
4.  If you do not use the product for a long time, remember to charge and discharge the 

battery pack once every 6 months.

Summary of Contents for LM T46


















Reviews: