background image

12

13

PRODUCT SAFETY WARNINGS

the protection circuitry of the battery pack. Longest 
life and best performance can be obtained if the 
battery pack is charged at room temperature.

11. Disconnect charger from the power supply when not 

in use. This will reduce the risk of electric shock or 
damage to the charger.

Battery pack

1.  Fully charge battery pack before first use.
2.  Recharge battery pack immediately when the power 

output starts to slow. DO NOT CONTINUE TO USE 
PRODUCT WHEN BATTERY LEVEL IS LOW.

3.  To prevent serious damage to the battery, charge in 

temperatures above 5ºC or below 45ºC. Longest life 
and best performance can be achieved when battery 
is charged at room temperature.

4.  If the battery temperature is above 45ºC it must be 

allowed to cool before putting it into the charging 
station.

5.  To reduce the risk of explosion, ensure the battery 

pack is not left in the sun for extended periods of 
time and that it is kept away from fire.

6.  Do not carry individual battery packs in your pockets 

or bag as they could short-circuit against other metal 
items.

7.  Should a li-ion battery catch fire, ensure to use the 

correct fire extinguisher to combat the fire. DO NOT 
THROW WATER ON A BURNING LI-ION BATTERY.

8.  If the battery pack becomes too hot during charging, 

disconnect and switch off immediately. Contact the 
service centre directly.

9.  Do not attempt to open the battery yourself.
10. When battery pack is not in use keep it away from 

other metal objects such as paperclips, coins, keys, 
nails, screws or other small metal objects that can 
make a connection from one terminal to another. 

Maintenance and storage

1.  Keep all nuts, bolts and screws tight to be sure the 

product is in a safe working condition.

2.  Check the grass collector frequently for wear or 

deterioration.

3.  Be careful when adjusting the product to prevent 

trapping fingers between moving blades or other 
fixed parts of the product.

4.  Always allow the product to cool down before storing.
5.  When servicing the blades be aware that even though 

the power source is switched off, the blades can still 
move.

6.  Replace worn or damaged parts for safety. Use only 

genuine replacement parts and accessories.

7.  DO NOT attempt to open the charger and battery 

pack. There are no customer serviceable parts inside. 
Return to any authorised service centre.

8.  Store the appliance with battery pack fully charged at 

room temperature (around 20ºC).

PRODUCT SAFETY WARNINGS

Summary of Contents for LM G32
















Reviews: