26
27
MAINTENANCE AND STORAGE
WARNING:
Before performing any maintenance or cleaning work, always ensure
that the battery pack/safety key has been removed. Wait until the blade has stopped
completely and the machine has cooled down.
Cleaning
Cleaning the product
– Use a soft brush to remove accumulated dust and debris. Wear safety glasses to protect
your eyes whilst cleaning.
– Wipe down the product enclosure with a slightly damp cloth. Do not spray the unit with
water. Water may destroy the switch unit and the electric motor.
Maintenance
NOTE:
Always wear gardening gloves when handling or working near sharp blades.
1. Keep all nuts, bolts and screws tight to ensure that the machine is in a safe working
condition.
2. Check the grass bag frequently for wear or deterioration.
3. Examine the machine and replace worn or damaged parts for safety.
Removing/Installing the blade (Fig. O)
1. Use the correct size wrench to uninstall the blade bolt nut.
2. Wearing heavy gloves hold the blade still and turn the wrench anti-clockwise to remove
the bolt.
3. Fit the replacement blade correctly with marking facing up and align pegs, refit the bolt
and retighten securely to torque 20N.m.
WARNING:
Replace or re-sharpen the mowing blade at the end of the mowing
season. Always have the mowing blade re-sharpened or replaced by a
recommended Yard Force service centre.
Unbalanced blades will cause the lawn mower to vibrate violently which can
increase the risk of accidents occurring.
Battery maintenance:
Use the following procedures to achieve the best battery life:
1. Protect the battery against moisture and water.
2. Store the battery only within temperature range of 5
o
C to 45
o
C. Do not leave the battery
in direct sunlight for extended periods of time.
3. Clean the battery regularly with a soft, clean and dry brush.
4. If you do not use the product for a long time, remember to charge and discharge the
battery pack once every 6 months.
Storage and transport
Storage
After cleaning the unit thoroughly, store mower in a dry room and allow the motor to cool
down.
NOTE:
Remove the safety key and battery packs. Ensure cables are not trapped when
folding/unfolding the handle. If stored vertically make sure the mower is positioned in a corner
so that the blade is facing inwards against a wall and the machine is secure to prevent it
falling over.
Transport
Use the original packaging to ship whenever possible.
MAINTENANCE AND STORAGE
