22
23
MAINTENANCE AND STORAGE
WARNING:
When servicing, use only identical replacement parts. Use of any other parts may
create a hazard or cause product damage. To ensure safety and reliability, all repairs should
be performed by a qualified service technician.
WARNING:
To avoid serious personal injury, always remove the battery pack from the product
when cleaning or performing any maintenance.
CLEANING
1.
Use a soft brush to remove debris from all air intakes and cutting blade.
2.
To remove pitch and other sticky residue, spray the blades with resin solvent. Run the
motor briefly so that the solvent is evenly distributed.
3.
Wipe the surface with a dry cloth.
Maintenance
1.
Keep all nuts, bolts and screws tight to be sure that the machine is in safe working
condition.
2.
Examine the machine and replace worn or damaged parts for safety
3.
Check that the guards are undamaged and correctly fitted. Carry out necessary
maintenance or repairs before using.
4.
Do not use the unit if the blades are blunt or worn. This will overstress the motor and
gearbox of the machine.
Lubricating the blade
For best operation and longer blade life, lubricate the hedge trimmer blade with light weight
machine oil before and after each use. Remove the battery pack and lay the trimmer onto a
flat surface. Apply the oil along the edge of the top blade
TRANSPORTING AND STORING
1.
Always place the blade guard on the blade before storing or transporting the hedge
trimmer. Use caution to avoid the sharp teeth of the blade.
2.
Clean the hedge trimmer thoroughly before storing.
3.
Store the hedge trimmer indoors, in a dry place that is inaccessible to children.
4.
Keep away from corrosive agents such as garden chemicals and deicing salts.
TROUBLESHOOTING
WARNING!
Before performing any repair work, always remove the battery pack.
Caution!
Improper repairs can result in the product functioning unsafely. This endangers yourself and
your environment.
Faults which cannot be rectified with the aid of following table may be rectified by a specialist
company only (customer service center).
Please be aware that any improper repairs will also invalidate the warranty and additional
costs may be incurred.
Use only genuine spare parts. Only these spare parts are designed and suitable for the
product. The use of other spare parts not only voids the warranty, you can also endanger
yourself and your environment.
Fault
Possible cause
Solution
Product is not
running.
No electrical contact between the
trimmer and battery
Remove battery, check contacts and
reinstall the battery pack
The battery pack is depleted
Charge the battery pack
The two switch levers are not
depressed simultaneously
Depress the switch levers
on the front and rear handle
simultaneously
The battery pack is too hot
Remove the battery pack from the
tool and allow it to cool until the
temperature drops below 50°C
Blade Jammed
Remove battery pack full and then
wearing gloves removing the blade
jam ,replace the battery pack and
restart
Rear handle rotate lever or handle not
fully located into position
Recheck and posn where release
button is fully located
