background image

10

11

PRODUCT SAFETY WARNINGS

assembled. The use of the hedge trimmer without the 
proper guard may result in serious personal injury!

7.  Use both hands when operating the hedge trimmer. 

Using one hand could cause loss of control and result 
in serious personal injury.

8.  Do not grasp the exposed cutting blades or cutting 

edges when picking up or holding the hedge trimmer.

9.  Do not use on a ladder, rooftop, tree, or other 

unstable support. Stable footing on a solid surface 
enables better control of the hedge trimmer in 
unexpected situations.

10. Never allow children to operate the hedge trimmer.
11. Never remove or tamper with safety devices. Check 

their proper operation regularly. Never do anything to 
interfere with the intended function of a safety device 
or to reduce the protection provided by a safety 
device.

12. Never operate the hedge trimmer without proper 

guards, plates, or other safety protective devices in 
place.

13. Check damaged parts before further use of the hedge 

trimmer. A guard or other part that is damaged should 
be carefully checked to determine that it will operate 
properly and perform its intended function. Check for 
alignment of moving parts, binding of moving parts, 
breakage of parts, mounting, and any other condition 
that may affect its operation. A guard or other part 
that is damaged should be properly repaired or 
replaced by an authorized service center unless 
indicated elsewhere in this manual.

PRODUCT SAFETY WARNINGS

14. Check the blade and motor mounting bolts at 

frequent intervals for proper tightness. Also, visually 
inspect blade for damage (e.g., bent, cracked, and 
worn). 

15. Replace the blade if it is bent or cracked. An 

unbalanced blade causes vibration that could 
damage the motor drive unit or cause personal injury.

16. If the equipment should start to vibrate abnormally, 

stop the motor and check immediately for the cause. 
Vibration is generally a warning of trouble.

17. The trimmer shall be used to cut stems less than (16 

mm) thick.

18. Trim only in daylight or in good artificial light.
19. Remove or disconnect battery before servicing, 

cleaning, or removing material from the hedge 
trimmer.

20. Do not wash with a hose; avoid getting water in 

motor and electrical connections.

21. When servicing use only identical replacement parts 

listed in this manual. Use of parts which do not meet 
the original equipment specifications may lead to 
improper performance and compromised safety.

22. Follow instructions for lubricating and changing 

accessories.

23. Keep handles dry, clean and free from oil and grease.
24. Save these instructions. Refer to them frequently and 

use them to instruct others who may use this tool. If 
you loan this tool to someone else, also loan these 
instructions to them to prevent misuse of the product 
and possible injury.

Summary of Contents for LH C45W













Reviews: