background image

20

21

TROUBLESHOOTING

WARNING!

Before performing any repair work, always remove the battery pack.

Caution!

Improper repairs can result in the product functioning unsafely. This endangers yourself and 
your environment.

Faults which cannot be rectified with the aid of following table may be rectified by a specialist 
company only (customer service center).

Please be aware that any improper repairs will also invalidate the warranty and additional 
costs may be incurred.

Use only genuine spare parts. Only these spare parts are designed and suitable for the 
product. The use of other spare parts not only voids the warranty, you can also endanger 
yourself and your environment.

Fault

Possible cause

Solution

Product is not 

running.

No electrical contact between the 

trimmer and battery

Remove battery, check contacts and 

reinstall the battery pack

The battery pack is depleted

Charge the battery pack

The two switch levers are not 

depressed simultaneously

Depress the switch levers 

on the front and rear handle 

simultaneously

The battery pack is too hot

Remove the battery pack from the 

tool and allow it to cool until the 

temperature drops below 50°C

CE DECLARATION

To the provisions of Council Directives

We

MEROTEC GmbH, 

Otto-Brenner-Straße 8, 

47877 Willich/ Deutschland

Declare that the product:

Description:  20V HEDGE TRIMMER

Model No. LH C45W/ M0E-20ET-510

Function: Trimming of hedges bushes

Complies with the essential health and safety requirements of the 
following directives:

Machinery Directive 2006/42/EC
Electromagnetic Compatibility Directive 2014/30/EU
EC Directive 2011/65/EU and its amendment Directive (EU) 2015/863 (RoHS)
Noise Directive, amended by 2005/88/EC conformity assessment procedure: 
2000/14/EC Annex VI
Measured Sound Power Level: 90 dB (A) K=3.0dB(A)
Declared Guaranteed Sound Power Level: 94 dB (A)

Standards and technical specification referred to:

EN 60745-1:2009+A11:2010
EN 60745-2-15:2009+A11:2010
EN 55014-1:2017
EN 55014-2:2015

Authorized Signatory
Date: 24.03.2020    

Signature:________________________
Place: Willich
Name: Roland Menken    
General Manager                                     

MEROTEC GmbH, 
Otto-Brenner-Straße 8, 
47877 Willich/ Deutschland

*) The object of the declaration described above satisfies the provisions of directive 2011/65/

EU of the European Parliament and the Council of 8 June 2011 on limiting the use of certain 

harmful substances in electrical and electronic appliances.

Summary of Contents for LH C45W













Reviews: