16
WARNING!
If the brush cutter vibrates
excessively. STOP the engine immediately and
investigate the cause.
STARTING THE BRUSH CUTTER
Primer Bulb
●
Press the primer bulb located at the
bottom of the air filter until the primmer
bulb fills with the fuel mixture.
●
Move the choke lever to the start
position.
●
Set the ON/OFF switch (14) to the ON
position.
●
Briskly pull the starter until the engine
splutters.(This may take up to 10 pulls).
●
Immediately move the choke lever to the
run position.
●
Pull the starter again until the engine
starts.
●
Grasp the right handle with your right
hand to depress the throttle interlock (15)
and squeeze the throttle lever (16) to
increase the speed of the engine.
Choke lever
ON
OFF
Pull
Start
Run
Throttle
Interlock
Throttle
Lever
Summary of Contents for GT A42
Page 23: ...23 NOTES ...
Page 24: ...24 29 04 20 ...
