16
perfect condition.
Bent or dull saw blades can
break, negatively influence the cut, or lead to
kickback.
8. Do not brake the saw blade to a stop by applying
side pressure after switching off.
The saw blade
can be damaged, break or cause kickback.
9. Clamp material well. Do not support the work
piece with your hand or foot.
Do not touch
objects or the floor with the saw running. Danger of
kickback.
10.Secure the work piece.
A work piece clamped with
clamping devices or in a vice is held more secure
than by hand.
11.Always wait until the machine has come to a
complete stop before placing it down.
The tool
insert can jam and lead to loss of control over the
power tool.
12.Before any work on the machine (e. g.
maintenance, changing the tool, etc.) as well as
during its transport and storage, lock the On/Off
switch in the off position.
There is danger of injury
when the On/Off switch is unintentionally actuated.
13.Protect the power tool against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture.
Danger of explosion.
14.Wear the dust mask when using the tool .
SAFETY INSTRUCTION
Summary of Contents for GDGS12
Page 2: ...2 ...
