13
Third Function Valve Kit TVK-YL610P for YL610 on YT347/359
Third Function Valve Kit for YL610
3.5.4 If SCV lever is out of adjustment, adjust the Adjustment
Nut in or out until you get free movement of the clevis pin
in its slot.
(1) With the SCV lever in the neutral position and the lock
engaged, remove hairpin clip (A) from the linkage retaining
its clevis pin and check to see if the clevis pin is moving
freely.
(2) If it is too tight, the Adjustment Nut will need to be adjusted
until the clevis pin moves freely in its slot.
Once the clevis pin moves freely in its slot, reinstall the hair pin and check to see if the neutral position and SCV
Lock can be locked in Neutral.
Parts needed
:
3.6.1 Install Harness Assembly, Third Function (20) to loader valve body, Regen, Lock Unit (6) and connect
Relay and Switch as shown in the illustrations.
3.6.2 Secure the lower part of the Harness Assembly Third Function
(20) in place with the clip installed on the wiring harness as
shown in the illustration.
3.6 Installing the Wiring Harness
Item No.
Part No.
Description
Qty.
20
1TN340-43610
HARNESS ASSY, LOADER
1
10
1A8300-51210
BAND, REPEAT
6
Do Not Adjust
Jam Nut
Adjustment Nut
YM772
A
Clevis Pin
20
YM685
Relay
Switch
To Loader
Control Lever
20
Relay
Switch
YM686
Clip
